Product: PAF Burners
Forney Parallel Air Flow (PAF) burners are custom engineered for a wide range of heat inputs while providing the flexibility of firing a variety of fuel types.
The Forney Parallel Air Flow (PAF) burner design provides a simple, economical, low maintenance method for burning liquid or gaseous fuels with maximum efficiency at low excess air rates. PAF burner principles are adaptable to virtually any type of steam generator or furnace application.
The PAF burner is composed of three major assemblies depending on fuel capability:
- Air frame assembly
- Air swirler assembly
- Liquid fuel atomizer and/or Gaseous fuel manifold and cane spud assembly.
The air frame consists of a front mounting plate, burner access plate, combustion air tube, sleeve type damper and a multivane type air swirler attached to the center burner guide tube.
The multivane air swirler is designed to produce optimum air/fuel mixing, flame shape and flame stability over a wide turndown range.
Steam, air and mechanical atomization are available for a wide range of liquid fuels. For gaseous fuels, a manifold and “cane” spud type nozzles are used.
Typical Specifications
| Throat Diameter: | 12 to 45 inches |
| Heat Input: | 20 to 300 million Btu per hour |
| CO emissions: | Less than 50 PPM corrected to 3 percent oxygen |
| Excess Air Levels: | 5 percent or less while firing gas 10 percent or less while firing oil |
| Fuels Fired: | Light & heavy oils Natural gas & propane Waste gases such as digester, landfill, blast furnace, and coke oven gas |
| Oil Atomization: | Steam, air, or mechanical |
| Gas Nozzles: | Multiple adjustable spud-type |
| Register: | Multiple concentric annular flow and axial swirl flame stabilization |
| Flame Detector: | A wide variety UV or IR detectors |
| Turndown Ratio: | Oil, better than 8 to 1 Gas, better than 10 to 1 |
| Fuel Pressure: | Oil, 130 to 300 psig (depending on capacity and turndown) Gas, 15 to 25 psig (depending on capacity and turndown) |
| Combustion Air Temperature: | Ambient to 700°F |
- Industry proven design with years or experience in utility and industrial boilers.
- Key component to convert main fuel from coal to gas.
- Ancillary Equipment, such as flame scanners, igniters, valves, control logic, all available from one source.
- Burner of choice for heavy fuel oils, viscous waste fuels and low BTU fuels, custom designs available.
Features:
- 20-300mm BTU/Hr Heat Input Range
- Economical Design – Single or dual air zone and spinner
- Automation – pneumatic burner isolation and oil gun retraction available.
- Low Pressure Drop – operates with as little as 3.0″ w.c. drop across the throat, making it ideal for retrofit applications.
- Meets all industry safety and environmental specifications by utilizing various emissions control techniques.
PAF Burners Spec Sheet
Publication #404002-12